System Settings; Network - Reach ENC1260 User Manual

Up
Down
Zoom In
Zoom Out
There are three options of control speed, High, Mid and Low There are three options of control speed, High, Mid and Low control.
When multiple cameras are connected
5

System Settings

System Settings
5.1

Network

Click on "System Settings">>"
encoder.
The encoder supports both
address setting.
After successful settings, the
after the reboot.
Copyright © Shenzhen Reach Tech Co., Ltd. Copyright © Shenzhen Reach Tech Co., Ltd.29 / 33
are connected, "Address bit" is used for selecting
">>"Network" to enter settings of network parameters of the to enter settings of network parameters of the
both DHCP dynamic IP address assignment and DHCP dynamic IP address assignment and static IP
the encoder will be restarted and the settings will take effect will be restarted and the settings will take effect
.
is used for selecting cameras.
REACH ENC1260
User's Manual