Rtsp Setting - Reach ENC1260 User Manual

downloaded from "Streams
the sdp file with notpad to modify corresponding file with notpad to modify corresponding ip and port inofmraiton. The following is
an example of a sdp file:
m=video 9500 RTP/AVP 96
a=rtpmap: 96 H264/90000
a=fmtp: 96 packetization-mode=1; profile
aP48sA==
c=IN IP4 234.255.0.90
Where, "9500" is the port number filled in the is the port number filled in the encoderweb page
please fill it according to the actual situation please fill it according to the actual situation. "234.255.0.90" is the
,please fill it according to the please fill it according to the actual situation.
2. The sdp file should be refreshed when the The sdp file should be refreshed when the video resolution is changed, please redownload
the sdpfile and modify the file and modify the ip and port.
3. The sdp file of the encoder
4.4.3

RTSP Setting

Select RTSP from the "Protoca Select RTSP from the "Protocal" field.
Item
Copyright © Shenzhen Reach Tech Co., Ltd. Copyright © Shenzhen Reach Tech Co., Ltd.21 / 33
Streams">>"RTSP Settings"
:
profile-level-id=428028; sprop-parameter-sets=Z2QAKKwZGIBQBbk=
encoder does not supportaudio parameters.
. After the downloading, open After the downloading, open
and port inofmraiton. The following is
sets=Z2QAKKwZGIBQBbk=,
is changed, please redownload
Description
REACH ENC1260
User's Manual
,
is the IP address