Related Manuals for Reach ENC120
Summary of Contents for Reach ENC120
-
Page 1: User Manual
REACH VGA Encoder ENC120 User Manual V2.5 2012-01 Copyright© Shenzhen Reach IT Co., Ltd. ... - Page 2 Any part of this document, including the text, image and graph, is the property of Shenzhen Reach IT Co., Ltd. No part of this document shall be copied in any means without the prior written consent of Shenzhen Reach IT Co., Ltd. Reach reserves the right to revise this document without any prior notice.
- Page 3 REACH ENC120 VGA Encoder User Manual across any problem that cannot be solved according to the manual, please contact our technical department for solutions. Thank you. Copyright© Shenzhen Reach IT Co., Ltd. 3 / 13...
-
Page 4: Table Of Contents
2.6.4 Change encoder IP address ................11 2.7 Parameter Setting ....................12 2.7.1 Video setting ....................12 2.7.2 Screen adjustment ..................12 2.7.3 Audio setting ....................12 2.7.4 Caption setting ....................13 Copyright© Shenzhen Reach IT Co., Ltd. 4 / 13... -
Page 5: Basic Information
Software Technology Co., Ltd for VGA signal coding and network transmission. It can be used together with the full range of Multimedia Record & Play Servers of Reach. The VGA encoder has VGA input and output interface and Ethernet interface to access the VGA signal and transmit the hardware-coded signal on the IP network. -
Page 6: Product View
REACH ENC120 VGA Encoder User Manual 1.3 Product View Fig.1 REACH ENC120 VGA Encoder 1.4 Product Interface Fig.2 Interfaces of ENC120 1 Power Input 5 MIC In (XLR) 2 VGA In 6 Line In 3 VGA Loop Out 7 LAN... - Page 7 REACH ENC120 VGA Encoder User Manual VGA cable 1 PCS To transmit VGA signal to the encoder Video/audio cable 1 PCS To transmit the audio signal to the encoder Certificate of 1 copy conformity Copyright© Shenzhen Reach IT Co., Ltd. 7 / 13...
-
Page 8: Product Configuration
Windows system, click Start→run→command to open the command line window, and enter <ping 192.168.1.100> in the command line window, and then click Enter key. If the following message appears, it indicates that the encoder has been normally started. Copyright© Shenzhen Reach IT Co., Ltd. 8 / 13... -
Page 9: Logging On Encoder Configuration Interface
Click “log on” button to enter the encoder management configuration page, as shown in the following figure: Copyright© Shenzhen Reach IT Co., Ltd. 9 / 13... -
Page 10: System Setting
The system supports simplified Chinese interface and English interface. To set the system language, you need to select the corresponding language and then click “save”. The system will exit the log-on interface, and you need to log on the system again. Copyright© Shenzhen Reach IT Co., Ltd. 10 / 13... -
Page 11: Change Password
You can view the “system information” to check whether the system upgrade is successful or not. 2.6.4 Change encoder IP address (1) Enter new IP address; (2) Click “change”; Copyright© Shenzhen Reach IT Co., Ltd. 11 / 13... -
Page 12: Parameter Setting
2.7.3 Audio setting Through the audio setting, you can set the sampling rate and coding frame rate for the encoder to acquire the audio signal, and select the audio acquisition interface Copyright© Shenzhen Reach IT Co., Ltd. 12 / 13... -
Page 13: Caption Setting
The caption position can be set thorough the horizontal coordinate and vertical coordinate parameters. To ensure the consistence between the image acquisition time and local time, you can synchronize the time through Copyright© Shenzhen Reach IT Co., Ltd. 13 / 13...