Viewing A Source-Port Filter - HP ProCurve 2810 Series Access Security Manual

Viewing a Source-Port Filter

You can list all source-port filters configured in the switch and, optionally, the
detailed information on a specific filter.
Syntax: show filter [index]
Displays a listing of configured filters, where each filter
entry includes an IDX (index) number, Filter Type, and
Value :
IDX: An automatically assigned index number used to
identify the filter for a detailed information listing. A
filter retains its assigned IDX number for as long as the
filter exists in the switch. The switch assigns the lowest
available IDX number to a new filter. This can result in
a newer filter having a lower IDX number than an older
filter if a previous (source-port) filter deletion created
a gap in the filter listing.
Filter Type: Indicates the type of filter assigned to the
IDX number.
Value: Indicates the port number or port-trunk name
of the source port or trunk assigned to the filter.
Use show filter to learn the index number of a specific
filter you want to examine in more detail.
[ index ]
Displays detailed data on the filter designated by the index
number. For source-port filters, the display includes the
source-port number, a listing of all ports and/or trunks on
the switch (with their port types), and the filter action
configured on each port or trunk (Forward—the default—
or Drop).
For example, assume that these three filters exist on the switch:
Source Port Destination
Port(s)
1 6-7
2 8-9
3 1-2
Action
Drop; Forward on all other ports/trunks
Drop; Forward on all other ports/trunks
Drop; Forward on all other ports/trunks
Traffic/Security Filters
Using Source-Port Filters
10-7