Viewing A Source-Port Filter - HP 2600 Series Function Manual

Traffic/Security Filters (ProCurve Series 2600/2600-PWR and 2800 Switches)

Viewing a Source-Port Filter

You can list all source-port filters configured in the switch and, optionally, the
detailed information on a specific filter.
Syntax: show filter
Displays a listing of configured filters, where each filter entry includes
an IDX (index) number, Filter Type, and Value :
IDX: An automatically assigned index number used to identify the filter
for a detailed information listing. A filter retains its assigned IDX
number for as long as the filter exists in the switch. The switch assigns
the lowest available IDX number to a new filter. This can result in a
newer filter having a lower IDX number than an older filter if a previous
(source-port) filter deletion created a gap in the filter listing.
Filter Type: Indicates the type of filter assigned to the IDX number.
Value: Indicates the port number or port-trunk name of the source port
or trunk assigned to the filter.
Use show filter to learn the index number of a specific filter you want to
examine in more detail.
index
[ ]
Displays detailed data on the filter designated by the index number. For
source-port filters, the display includes the source-port number, a listing
of all ports and/or trunks on the switch (with their port types), and the
filter action configured on each port or trunk (Forward—the default—or
Drop).
For example, assume that these three filters exist on the switch:
Source Port Destination
Port(s)
1 6-7
2 8-9
3 1-2
Action
Drop; Forward on all other ports/trunks
Drop; Forward on all other ports/trunks
Drop; Forward on all other ports/trunks
Using Source-Port Filters
10-7