HP ProCurve 2810 Series Access Security Manual page 296

Hide thumbs Also See for ProCurve 2810 Series:
Table of Contents

Advertisement

Traffic/Security Filters
Using Source-Port Filters
10-12
Viewing a Named Source-Port Filter
You can list all source-port filters configured in the switch, both named and
unnamed, and their action using the show command below.
Syntax: show filter source-port
Displays a listing of configured source-port filters, where
each filter entry includes a Filter Name, Port List, and
Action:
Filter Name: The filter-name used when a named
source-port filter is defined. Non-named source-port
filters are automatically assigned the port or port trunk
number of the source port.
Port List: Lists the port and port trunk destinations
using the filter. Named source-port filters that are not
in use display NOT USED.
Action: Lists the ports and port trunks dropped by the
filter. If a named source-port filter has been defined but
not configured, this field is blank
index
For the supplied index (IDX) displays the action taken
(Drop or Forward) for each destination port on the switch.
Sample Configuration for Named Source-Port Filters
A company wants to manage traffic to the Internet and its accounting server
on a 26-port switch. Their network is pictured in Figure 10-6. Switch port 1
connects to a router that provides connectivity to a WAN and the Internet.
Switch port 7 connects to the accounting server. Two workstations in
accounting are connected to switch ports 10 and 11.
.

Advertisement

Table of Contents
loading

Table of Contents