Table of Contents
Advertisement
Connecting the Camera
2.1 DEFAULT PROTOCOL INFORMATION
Unlike standard security cameras, PTZ (pan-tilt-zoom) cameras require
special protocol information to enable a Security DVR to control the
camera movement.
Input the following information into your DVR to enable PTZ controls.
• Default ID: 1
• Default Baud Rate: 2400
• Default Protocol: Pelco-D
For details on setting up your DVR with the PTZ camera, see "Controlling
the PTZ Camera with your DVR" on page 16.
You will not need to change the default protocol information on your
camera unless you are using multiple PTZ cameras or if your DVR does
not support the default settings (see your DVR's instruction manual for
details). If you need to change the PTZ protocol information, see
"Changing Protocol Information" on page 21.
6
Advertisement
Table of Contents
