Default Protocol Information - Lorex Vantage LZC7091 Instruction Manual

10x pan-tilt-zoom camera

Hide thumbs Also See for Vantage LZC7091:

Table of Contents

2.1 DEFAULT PROTOCOL INFORMATION

Unlike standard security cameras, PTZ (pan-tilt-zoom) cameras require

special protocol information to enable a Security DVR to control the

camera movement.

Input the following information into your DVR to enable PTZ controls.

• Default ID: 1

• Default Baud Rate: 2400

• Default Protocol: Pelco-D

For details on setting up your DVR with the PTZ camera, see "Controlling

the PTZ Camera with your DVR" on page 15.

You will not need to change the default protocol information on your

camera unless you are using multiple PTZ cameras or if your DVR does

not support the default settings (see your DVR's instruction manual for

details). If you need to change the PTZ protocol information, see

"Changing Protocol Information" on page 20.

Connecting the Camera

Table of Contents