Controlling The Ptz Camera With Your Dvr; Initial Setup - Lorex LZC7091 Instruction Manual

Controlling the PTZ Camera with your DVR

4. CONTROLLING THE PTZ CAMERA
WITH YOUR DVR
Once your camera is connected to the DVR, you must perform initial
setup to control the camera using the DVR. Once this setup is complete,
you will be able to move the camera, configure preset positions, and use
other advanced controls.
PTZ features that are available to you will depend on the model of DVR
that you have. The following instructions are based on the Lorex ECO2
DVR's (LH130 Series). For other DVR models, check your instruction
manual for details.

4.1 INITIAL SETUP

In the initial setup process, you will input the camera's protocol
information into your DVR. This enables PTZ functionality.
TIP: The camera will display the configured PTZ protocol information
when it starts up. To quickly display this information, disconnect and
reconnect the power adapter.
To perform initial setup using a Lorex ECO2 DVR:
1. Ensure the cables are connected correctly to the DVR according to
"Connecting the Camera" on page 2.
2. On the DVR, Right-click with the mouse to open the Menu Bar and
click the Main Menu button (
3. Click Device and select the PTZ tab.
16
).