Selecting Ptz Presets On The Eco2 Dvr; Deleting Ptz Presets On The Eco2 Dvr; Starting / Stopping Ptz Cruise On The Eco2 Dvr - Lorex LZC7091 Instruction Manual

Controlling the PTZ Camera with your DVR
4. Complete the steps above to create additional presets as needed.
Press Save when you are finished to save all created presets.

4.5 SELECTING PTZ PRESETS ON THE ECO2 DVR

1. In the No. field, select the number of the preset you would like to
select.
2. Click Go to to go to the preset.

4.6 DELETING PTZ PRESETS ON THE ECO2 DVR

1. In the No. field, select the number of the preset you would like to
delete.
2. Click Clear to delete the preset and click Save to save your changes.
4.7 STARTING / STOPPING PTZ CRUISE ON THE
ECO2 DVR
When PTZ cruise is enabled, the camera will cycle through saved
presets. You must set and save presets to use PTZ cruise. For details on
setting presets, see "Setting PTZ Presets on the ECO2 DVR" on page 19.
To start / stop PTZ cruise on the ECO2 DVR:
1. Right-click to exit PTZ menu.
2. Right-click to open the Menu Bar and click the Start Cruise button
( ). Enter the DVR password (default: 000000). The camera will
cycle through PTZ presets.
3. To stop the PTZ cruise, right-click to open the Menu Bar and click the
Stop Cruise button (
20
). Enter the DVR password (default: 000000).