Oximeter Operation; Turning On The Oximeter - EDAN H100B User Manual

H100B Pulse Oximeter User Manual

3 Oximeter Operation

3.1 Turning on the Oximeter

The oximeter is turned on by pressing the on/off button,
it will cycle through a POST before displaying valid data
values. Verify that all the circuitry and functions of the
oximeter work properly during the POST. It needs a few
seconds to complete the verification procedure POST. If
it functions incorrectly, do not use the oximeter.
Press the On/Off button for one second to turn on the
oximeter.

At first the EDAN LOGO is shown.

Secondly the product model is displayed.
Figure 3-1 EDAN LOGO
- 31 -