EDAN H100B User Manual page 33

H100B Pulse Oximeter User Manual
remove the battery access door.
3. Place four AA batteries as shown in the
following figure, first push it oriented as
shown in ①, then press it oriented as shown
in ②.
4. Install the battery compartment cover.
To install the Ni-MH rechargeable battery package:
1. Make sure the oximeter is turned off.
2. Press the battery compartment latch and
remove the battery access door.
3. Place the Ni-MH rechargeable battery package
as shown in the follow figure, first push it
oriented as ①, then press it oriented as ②.
4. Install the battery compartment cover.
- 25 -