Neutral At Terminal Block To Rear Bulkhead And From Rear Bulkhead To Control Housing; Power Cord To Rear Bulkhead And From Rear Bulkhead To Control Housing; Wall Receptacle Polarity Check; Bulkhead To Control Housing Wall Receptacle Polarity Check - Amana LG4219*2 Service Manual

a W A R N I N G
To reduce the risk of electric shock, fire, explosion, serious injury or death:
•Disconnect electric power to the dryer before servicing.
•Close gas shut-off valve to gas dryer before servicing.
•Never start the dryer with any guards/panels removed.
•Whenever ground wires are removed during servicing, these ground wires must be
reconnected to ensure that the dryer is properly grounded.
2. NEUTRAL AT TERMINAL BLOCK TO REAR BULKHEAD AND FROM REAR BULKHEAD TO
CONTROL HOUSING (Electric Models Only — Figure 2).
U.S. Models
3. POWER CORD TO REAR BULKHEAD AND FROM REAR BULKHEAD TO CONTROL HOUSING. WALL
RECEPTACLE POLARITY CHECK (Gas Models Only — Figure 3).
Canadian Models
Figure 2
Figure 3
7
W001
RS3200001 (502992R3)
Rev. 3