Do you have a question about the LE4317W/L2 and is the answer not in the manual?
Questions and answers
Maria Schroeder
February 27, 2025
cannot find anything in paper manyal anout cooling light that stays on and can't figure how to tutn it off
1 comments:
Mr. Anderson
February 27, 2025
The "Cooling" light on an Amana LE4317W/L2 dryer typically indicates that the dryer is in the cool-down portion of the cycle. If the light remains on and you want to turn it off, follow these steps:
1. Wait for the Cycle to Complete – The light should turn off automatically after the drying cycle finishes. 2. Power Cycle the Dryer – Unplug the dryer from the power outlet, wait a few minutes, and then plug it back in to reset the control board. 3. Check the Timer or Cycle Setting – Ensure the dryer is not stuck in a cycle that keeps the cooling light on. 4. Inspect for Stuck Buttons – Press and release all dryer buttons to make sure none are stuck in a pressed position. 5. Test with a Different Cycle – Start a new cycle and see if the cooling light behaves normally. 6. Check for Electrical or Control Board Issues – If the light stays on continuously, there may be an issue with the dryer’s control board or timer mechanism, which might require professional service.
If the problem persists, consider contacting a technician for further troubleshooting.
This answer is automatically generated
Maria Schroeder
February 27, 2025
cool settibg button stays on. Cant seem to get it off.
nomention of this option in paper janual received eith dryer?
Need help?
Do you have a question about the LE4317W/L2 and is the answer not in the manual?
Questions and answers
cannot find anything in paper manyal anout cooling light that stays on and can't figure how to tutn it off
The "Cooling" light on an Amana LE4317W/L2 dryer typically indicates that the dryer is in the cool-down portion of the cycle. If the light remains on and you want to turn it off, follow these steps:
1. Wait for the Cycle to Complete – The light should turn off automatically after the drying cycle finishes.
2. Power Cycle the Dryer – Unplug the dryer from the power outlet, wait a few minutes, and then plug it back in to reset the control board.
3. Check the Timer or Cycle Setting – Ensure the dryer is not stuck in a cycle that keeps the cooling light on.
4. Inspect for Stuck Buttons – Press and release all dryer buttons to make sure none are stuck in a pressed position.
5. Test with a Different Cycle – Start a new cycle and see if the cooling light behaves normally.
6. Check for Electrical or Control Board Issues – If the light stays on continuously, there may be an issue with the dryer’s control board or timer mechanism, which might require professional service.
If the problem persists, consider contacting a technician for further troubleshooting.
This answer is automatically generated
cool settibg button stays on. Cant seem to get it off. nomention of this option in paper janual received eith dryer?