Vermiculite Panel Replacement - HearthStone hase lima 8150 Owner's Manual

V P
ERMICULITE ANEL
1. Remove packing material from spaces along
front edges of the outer left and outer right
panels.
2. Remove the panel lock plate above the outer
right panel.
3. Slide outer right panel slightly to the right, tilt top
into firebox, and remove the panel.
4. Slide all other panels to the right, tilt, and
remove.
5. To remove the upper panel, remove the screw
securing the air tube, slide the air tube to the
left, and remove it. Drop down the upper panel.
6. Install the side panels by placing each one into
the right most position and then slide it to the
left. All side panels are identical.
7. Replace the side panel lock plate.
8. Push side panels together tightly and center
them so the spaces along the front edges are
equal, Insert packing
separation.
9. To install the upper panel, insert the panel rear
edge first into the space below the baffle plate –
hold in place and insert the air tube. Seat air
tube to the right and reinstall screw.
Hearthstone Quality Home Heating Products, Inc ®
R :
EPLACEMENT
to prevent panel
Figure 17: Panel Detail
C P
ERAMIC ANELS
The ceramic panels do not require maintenance
other than an occasional dusting. On a cold stove
use a dry, clean cloth to wipe off any debris that may
have landed on the panels or top ring. A standard
glass cleaner may be used lightly to remove any
stains.
25
Lima Model 8150