Table of Contents
Advertisement
Power on server at specified time
Power off server immediately
Shut down OS and then power off server
Shut down OS and then restart server
Restart the server immediately
Schedule Daily/Weekly Power and Restart Actions
A confirmation message is displayed if you select any of these options, and you can
cancel the operation if it was selected accidentally.
Remote control
When you use the remote control function, you can view and interact with the
server console, and you can assign to the server a CD-ROM drive, diskette drive,
or disk image that is on your computer.
You must log in to the Remote Supervisor Adapter II with a user ID that has
read/write access to use any of the remote control features.
Important information about updating your Remote Supervisor Adapter
II firmware
Important: If you have updated the Remote Supervisor Adapter II firmware to the
latest level or plan to in the future, read the following information.
The Remote Supervisor Adapter II uses a Java applet to perform many functions.
When the Remote Supervisor Adapter II is updated to the latest firmware level, the
Java applet is also updated to the latest level. By default, Java caches (stores
locally) applets that were previously used. After a flash update of the Remote
Supervisor Adapter II firmware, the Java applet that the server uses might not be at
the latest level.
To correct this problem, complete the following steps:
1. Click Start → Settings → Control Panel.
2. Double-click Java Plug-in 1.4. The Java Plug-in Control Panel window opens.
To turn on the server at a specified time and start the operating system,
click Power on Server at Specified Time and set the time to turn on the
server.
To turn off the server without shutting down the operating system, click
Power Off Server Immediately.
To shut down the operating system and then turn off the server, click
Shutdown OS and then Power Off Server. This option requires that the
Remote Supervisor Adapter II software be installed. You might also have to
install IBM Director Agent.
To restart the operating system, click Shut down OS and then Restart
Server. This option requires that the Remote Supervisor Adapter II software
be installed. You might also have to install IBM Director Agent.
To turn off and then turn on the server immediately without first shutting
down the operating system, click Restart the Server Immediately.
To shut down the operating system, turn off the server at a specified daily
or weekly time (with or without restarting the server), and turn on the server
at a specified daily or weekly time, click Schedule Daily/Weekly Power
and Restart Actions.
Chapter 5. Performing Remote Supervisor Adapter II tasks
81
Hide quick links:
Advertisement
Table of Contents
