Vpd Command; Server Power And Restart Control Commands - IBM Remote Supervisor Adapter II User Manual

3.3v 3.35 2.80 2.95 3.05 3.10 3.50 3.65 3.70 3.85
12v
-5v
-3.3v -3.35 -4.10 -3.95 -3.65 -3.50 -3.10 -2.95 -2.80 -2.70
VRM1
VRM2
x345RSA>
Note: The output has the following column headings:

vpd command

Syntax
vpd sys
vpd asm
vpd bios
vpd ismp
vpd exp
Description
Use the vpd command to display vital product data for the system (sys), Remote
Supervisor Adapter II (asm), Remote Supervisor Adapter II SlimLine (asm), system
BIOS (bios), ISMP (ismp) and PCI-X expansion boxes (exp). The same information
is displayed as in the Web interface.
Example
x345RSA> vpd asm
Type
-----------------------------------------------------
Main
Boot
Video AV234X.1234.789
DD
x345RSA> vpd bios
Type
-----------------------------------
BIOS
x345RSA>

Server power and restart control commands

The server power and restart commands are as follows:
v power
v reset
96
Remote Supervisor Adapter II SlimLine and Remote Supervisor Adapter II: User's Guide
12.25 11.10 11.30 11.50 11.85 12.15 12.25 12.40 12.65
-5.10 -5.85 -5.65 -5.40 -5.20 -4.85 -4.65 -4.40 -4.20
HSL: hard shutdown low
SSL: soft shutdown low
WL: warning low
WRL: warning reset low
V: voltage (current value)
WRH: warning reset high
WH: warning high
SSH: soft shutdown high
HSH: hard shutdown high
BuildID Filename
GRE814 GRETMNUS.PKT
GRE814 GRETBTUS.PKT
RE78936
BuildID BuildDate
GRJT09 11-14-03
3.45
5.45
BuildDate Rev
12-03-03 16
11-19-03 16
Rev
10