Ldap Command - IBM Remote Supervisor Adapter II User Manual

Example
x345RSA> ifconfig eth0
-state enabled
-c dthens
-i 192.168.70.125
-g 0.0.0.0
-s 255.255.255.0
-n ASMA00096B9E003A
-r auto
-d auto
-m 1500
-b 00:09:6B:9E:00:3A
-l 00:00:00:00:00:00
x345RSA> ifconfig eth0 -c static -i 192.168.70.133
These configuration changes will become active after the next reset of the ASM.
x345RSA>
Note: The -b option in the ifconfig display is for the burned-in MAC address. The

ldap command

Syntax
ldap [options]
options:
Description
Use the ldap command to display and configure the LDAP protocol configuration
parameters.
100
Remote Supervisor Adapter II SlimLine and Remote Supervisor Adapter II: User's Guide
Option Description
-m MTU
-l LAA
-ri Remote IP address
-a Authentication protocol pap, chap, cthenp
burned-in MAC address is read-only and is not configurable.
-a loc|ldap|locId|Idloc
-b anon|client|login
-c client_dn
-d search_domain
-f group_filter
-g group_search_attr
-l string
-m login|cfg|lthenc
-n service_name
-p client_pw
-pc confirm_pw
-r root_dn
-s1ip host name/ip_addr
-s2ip host name/ip_addr
-s3ip host name/ip_addr
-s1pn port_number
-s2pn port_number
-s3pn port_number
-u search_attrib
-v off|on
-w on|off
-h
Values
Numeric between 60 and 1500
MAC address format. Multicast addresses are not
allowed (the first byte must be even).
Valid IP address format