Table of Contents
Advertisement
Power Linking
DMX Linking
DMX Modes
Master/Slave
Connectivity
COLORdash™ Batten-Quad 12 User Manual Rev. 3
The COLORdash™ Batten-Quad 12 supports power linking. You can power link up to 9
products at 120 V, 16 at 208 V, or 17 at 230 V.
This product comes with a power input cord. This product does not come with a power
linking cable; however, a power linking cable is available as an option.
You can link the COLORdash™ Batten-Quad 12 to a DMX controller using a standard
DMX serial connection. If using other DMX
COLORdash™ Batten-Quad 12, you can control each individually with a single DMX
controller.
The COLORdash™ Batten-Quad 12 uses the standard DMX data connection for the 4,
6, 10, 48, and 52 channel DMX modes.
· Refer to the
Introduction
· Refer to the
Operation
COLORdash™ Batten-Quad 12 to work in these modes.
· The
DMX Values
section provides you with detailed information regarding the
DMX modes.
The Master/Slave mode allows a COLORdash™ Batten-Quad 12 (the "master") to
control one or more COLORdash™ Batten-Quad 12s (the "slaves") without a DMX
controller. One COLORdash™ Batten-Quad 12 becomes the master when running an
auto program or by being in Static mode.
You must configure each slave product's control panel to operate in Slave mode. During
Master/Slave operation, the slave products will operate in unison with the master
product.
DO NOT connect a DMX controller to products operating in Master/Slave mode.
The DMX controller signals may interfere with the signals from the master.
The
Operation
section of this manual provides detailed instructions on how to
configure the Master and Slaves.
If you are not familiar with or need more information about DMX standards,
Master/Slave connectivity, or the DMX cables needed to link this product to a DMX
controller,
download
www.chauvetpro.com.
chapter for a brief description of these modes.
chapter to learn how to configure the
the
DMX
Primer
compatible products with the
from
the
CHAUVET®
Setup
website:
-7-
Advertisement
Table of Contents
