Cisco 7941G User Manual page 4

Buttons and Hardware Identification
Item
1
Programmable buttons
2 Phone screen
3 Footstand button
4 Messages button
5 Directories button
6 Help button
7 Settings button
Cisco Unified IP Phone 7941G, 7941G-GE, 7942, 7961G, 7961G-GE, and 7962 User Guide for Cisco Unified
Communications Manager 9.0 (SCCP and SIP)
4
Description
Depending on configuration, programmable buttons provide access to:
• Phone lines (line buttons) and intercom lines
• Speed-dial numbers (speed-dial buttons, including the BLF speed-dial feature)
• Web-based services (such as a Personal Address Book button)
• Call features (such as a Privacy, Hold, or Transfer button)
Buttons illuminate to indicate status:
Green, steady—Active call or two-way intercom call
Green, flashing—Held call
Amber, steady—Privacy in use, one-way intercom call, DND active, or logged into
Hunt Group
Amber, flashing—Incoming call or reverting call
Red, steady—Remote line in use (shared line, BLF status or active Mobile Connect
call)
Shows call features.
Enables you to adjust the angle of the phone base.
Auto-dials your voice message service (varies by service).
Opens/closes the Directories menu. Use the button to access call logs and directories.
Activates the Help menu.
Opens and closes the Settings menu. Use the button to change phone screen contrast and
ring settings.
Phone Features