Yujin Robot Iclebo smart YCR-M04-01 User Manual page 19

Problem
It is not
cleaning well.
When I press
the power button
to turn on the
robot cleaner,
it turns off
automatically.
The robot cleaner
is not responding.
The robot cleaner
is not charging.
After cleaning,
the robot cleaner
is not returning
to the
charging station.
18
Below is the explanation about the most occurred 'breakdowns'
when using this product.
If you can't solve the problem with information below,
inquire to your local Customer service center.
C a u s e
▶Dust bin is full.
▶Main brush is dirty.
▶Filter is contaminated.
▶Battery is low.
▶Battery is enough but the dust
bin is full.
▶Main brush is clogged with
hair and dust.
▶Power switch is turned off.
▶Battery is low.
▶Battery is not inserted
properly to the robot cleaner.
▶Battery of remote control is out.
▶Infrared sensor & beam part
of the remote control is
blocked or dirty.
▶Remote control is too near
to the charging station.
▶ station or robot
Charging
cleaner is not connected
properly to the plug.
▶Power of the charging station
is not connected properly.
▶Infrared generator & ejector
on the station and
Charging
detector of the robot cleaner
is dirty.
▶Cleaning was start with
auto-mode not from
the charging station.
S o l u t i o n
▶See <Product control & maintenance> and
empty the dust bin.
▶See <Product control & maintenance> and
use main brush.
▶See <Product control & maintenance> and
clean the dirty filter.
▶Charge the robot cleaner.
▶See <Product control & maintenance> and
empty the dust bin.
▶See <Product control & maintenance> and
clean main brush.
▶Check the power switch on the bottom
of the main body.
▶Re-charge the robot cleaner.
▶Insert the battery of robot cleaner properly.
▶Change the battery of the remote control.
▶Wipe the infrared sensor & beam part
of the remote control with soft cloth.
▶Keep a distance from the charging station
and press the button again towards
the robot cleaner.
▶Connect the power of charging station &
robot cleaner properly.
▶Connect the power of the charging station
properly.
▶Move the charging station. No objects must
be placed within left/right 50centimeters,
front 1.5meters from the
This is to enable the robot cleaner to return
to the charging station automatically
after cleaning.
▶Robot cleaner must start cleaning from
the charging station to return to
the charging station after cleaning.
station.
Charging