Time Setting - Yujin Robot Iclebo smart YCR-M04-01 User Manual

Auto-charge during use
4. If the battery is not enough when the robot cleaner is operating, it will return to
charging station for re-charge. (But, the cleaning must start from the
[Note] If you want to charge the robot cleaner while cleaning, press Base button
on the remote control. Robot cleaner will move to charging station for re-charge.
5. Once the robot cleaner is properly placed to the charging station, the status display lamp
will flash as green. Status display lamp will appear green when the charging is complete.
Charge manually
6. Connect the adapter to the main body of the robot cleaner directly.
7. Connect the power cord to the adapter then put the power plug into the outlet.

Time setting

1. Press the Clock button on the remote control.
Time display of the display screen will flicker.
2. Set the "Hour" with TIME (+), (-) button on the remote control.
3. Press Enter button to confirm the setting.
4. Set the "Minute" with TIME (+), (-) button on the remote control.
5. Press Enter button to confirm the setting.
Cleaning space
preparation
10
Remote control is required to set the time.
[Note] Current time must be set to use timer function.
1 1 2 2
Arranging the areas to clean enables efficient and fast cleaning.
1. Remove toys, magazines and shoes from the floor.
2. Close the door of unnecessary areas for cleaning.
Charging
3 3 4 4
station)
5 5