Main Brush Cleaning; Sensor Control - Yujin Robot Iclebo smart YCR-M04-01 User Manual

Main brush cleaning

1.Turn the robot cleaner
over and place the bottom
facing upside.
4. Clean the hair or foreign substance stuck on the main brush
※Use scissors or knife along the main brush to remove the hair easily.
Furrow

Sensor control

1. Wipe the sensor of the robot cleaner using cotton buds.
2. Wipe the sensor on the bottom of the robot cleaner
3.Separate the brush cover then divide
the main brush.
using the cleaning brush.
using cotton buds.
2.Unlock left/right fixed
clip of the main brush.
5. After cleaning, put the
square-shaped bump on the
left side of the main brush to
the square-shaped part.
15