Start/Stop Cleaning - Yujin Robot Iclebo smart YCR-M04-01 User Manual

Using the robot cleaner 최적의 청소를 위한 참고사항

Start/stop cleaning

1.Turn On the power
switch on the bottom of
the robot cleaner.
2.Press the power button
of the robot cleaner or
remote control. Status of
the robot cleaner will be
ready mode and light will
appear on the display screen.
3.Press Start/sop (
button of the robot cleaner
or remote control to start
cleaning. If no mode was
selected, it will start as
Auto-mode automatically.
4. Press Start/stop(
button on the main body
or remote control to stop
the robot cleaner
temporarily.
5. Press Start/stop(
button on the robot cleaner
or remote control to resume.
Using move, charge, turbo function
2
1
2
1 3
-Press Direction button to move the robot cleaner
to your wanted direction. Also, user can change
the direction when the power is on but not suctioning.
)
(Base) message will appear on the display
)
screen then robot cleaner will move to
the charging station and start charging.
)
-To return to normal suction status,
press Turbo button again.
1.Use the direction button of
remote control to send the
robot cleaner to specific area.
[Note] But, the backward
3
direction button is not available.
And the robot cleaner does not
move backwards.
2.Press Base button of the
remote control to make the
robot cleaner return to the
charging station.
3. Press Turbo button of
the remote control to
operate the robot cleaner
with more strength.
Turbo display will appear
on the display screen and
start cleaning.
11