FORWARD FACING - installation in the car
The BeSafe iZi Combi ISOfix can ONLY be installed forward-
!
facing in cars with 3-point belt.
The BeSafe iZi Combi ISOfix must not be used in the
!
front passenger seat without deactivating the airbag.
To mounting the BeSafe iZi Combi in forward-facing, remove
the front brace (3). Remove the lower part of the support leg.
Fit the black plastic plug, enclosed by purchase, to the end of
the support leg. This will protect the orginal car seat cover.
Position the BeSafe iZi Combi on the car seat.
1
2
Open both belt clamps
(17) at each top side of
the iZi Combi.
Bend down the flap
on the seat cover. See
green arrow.
14