Motorola AP-650 Series Installation Manual: Led Indicators

Ap-650 series thin access point.
Hide thumbs

Advertisement

2.9 LED Indicators

Both the Integrated Antenna model and the External Antenna model have LED activity indicators on
the front of the case for use with wall mount. With the External Antenna model unit mounted above
a ceiling, LEDs are at the center of an oval badge on the ceiling; a light pipe enables viewing the back
LEDs through the ceiling tile.
The LEDs provide a status display indicating error conditions, transmission, and network activity for
the 5 GHz 802.11a/n (amber) radio or the 2.4 GHz 802.11b/g/n (green) radio.
Task
Unadopted
Off
Normal
• If this radio band is enabled:
Operation
• If this radio band is disabled:
• If there is activity on this band:
Firmware
On
Update
Locate AP
Blink at 5Hz
Mode
(Out of Phase with Activity LED)
5 GHz Activity LED (Amber)
Blink at 5 second interval
Off
Blink at a 1Hz
Hardware Installation
2.4 GHz Activity LED (Green)
Blinking at 5Hz
• If this radio band is enabled:
Blink at 5 second interval
• If this radio band is disabled:
Off
If there is activity on this band:
Blink at a 1Hz
Off
Blink at 5Hz
(Out of Phase with Activity LED)
15

Advertisement

   Also See for Motorola AP-650 Series

Comments to this Manuals

Symbols: 0
Latest comments: