22
1.12 LED Indicators
AP-7562 Access Points have LED activity indicators on the front of the enclosure. The LEDs provide a status display
indicating error conditions, transmission, and network activity for the 2.4 GHz radio (green) and the 5 GHz radio
(amber).
Task
Unconfigured
On
Radio
Normal
• If this radio band is enabled:
Operation
• If this radio band is disabled:
• If there is activity on this band:
Firmware
Off
Update
Locate AP
LEDs blink in an alternating green, red and
Mode
amber pattern using an irregular blink rate.
This LED state in no way resembles normal
operating conditions
2.4 GHz Activity LED (Green)
Blink at 5 second interval
Off
Blink interval at 1 time per second
5 GHz Activity LED (Amber)
On
• If this radio band is enabled:
Blink at 5 second interval
• If this radio band is disabled:
Off
• If there is activity on this band:
Blink interval at 1 time per second
On
LEDs blink in an alternating green, red and
amber pattern using an irregular blink rate.
This LED state in no way resembles normal
operating conditions.
AP-7562 Access Point