RADVision Scopia XT5000 Series User Manual page 62

PaP
PiP
• Access the In-call menu by pressing ok/menu on the XT Remote Control Unit and then select
Layouts.
Alternatively, press and hold the Layouts
61 for layout descriptions).
Use the arrows to browse through the layouts
63), and select the desired layout.
The In-call menu automatically disappears from the display after a few seconds in a call. To bring
back the In-call menu, press ok/menu on the XT Remote Control Unit.
User Guide for Scopia XT5000 Series Version 3.2
Layout
The PaP (Picture and Picture) view shows two images of the same
size, presented side by side.
The PiP (Picture In Picture) view shows a video image in the main
screen, with an additional smaller image overlapping in the corner.
Typically, a remote presentation is displayed in the main part of the
screen, and the remote video is in the small image. If the remote
endpoint does not show any content, the display shows the remote
video in the main part of the screen, and the local presentation in
the small image.
Figure 45: In-Call menu
Description
key (refer to Table 10: Video layout options
(Figure 46: Available video layouts in a call
During Your Videoconference | 62
on page
on page