Call Forward - Follow Me - Vodavi Station User Manual

Call Forward
To remove Off-Net Call Forwarding:
1. Lift the handset or press the ON/OFF button.
2. Press the FWD button or dial either [640] or [662]. A
confirmation tone sounds and the FWD LED extinguishes.
SINGLE LINE TELEPHONE
The SLT operation uses the same procedures as used in
Digital Telephone operation described above, except there is
no FWD button. The user must use the 640 feature code to
activate and 662 to clear.

Call Forward - Follow Me

The Follow Me feature lets a user who is away from their
station, activate/deactivate call forwarding from another
station in the system. This lets the user forward their calls to
their current location or into Voice Mail, ACD/UCD, Hunt Group,
any other station in the system, or to an off-net location. When
this call forward is activated, all calls presented to the
forwarded station forward to the destination station
immediately.
To activate Follow Me Call Forwarding:
1. Lift the handset or press the ON/OFF button.
2. Dial the Follow Me Forward code [642] on the dial pad.
3. Dial station number of the station from which forwarding is
desired.
4. Dial the appropriate forwarding condition code.
[6] = All Calls
[7] = No Answer [9] = Busy/No Answer
5. Dial the three- or four-digit destination number where calls
are to be forwarded (Station, Voice Mail, ACD/UCD, Hunt
Group, or speed bin (only for off-net)).
6. Replace the handset or press the ON/OFF button.
[8] = Busy [ ] = Off-Net
35