Table of Contents
Advertisement
Off-Hook Voice Over (OHVO)
To place an Off-hook Voice Over call:
When an OHVO station calls a busy OHVO station and a busy
tone is received, the calling OHVO station must:
Press a preprogrammed OHVO button [628],
-or-
Use the Soft Key's OHVO option to initiate an OHVO
announcement. The following conditions will occur:
The HOLD button LED flashes at the called OHVO
station.
The OHVO receiving station receives a one-beep
warning tone.
The station receiving the OHVO call must be off-hook
and in H or P mode, in order to hear the calling OHVO
party's voice announcement.
The called OHVO station's existing conversation is
uninterrupted and the voice over announcement does
not drown out the existing conversation. If receiving
station is call forwarded, use 5# to override forwarding.
The calling OHVO station is not connected or able to
hear the called station's conversation (connection only
allows calling station to transmit to the called station).
The calling station is placed in a one-time
DND mode upon initiating the Voice Over.
One-Time DND cannot be toggled during
the OHVO call. The station receiving the
OHVO call must be off-hook and in H mode.
79
Advertisement
Table of Contents
