Table of Contents
Advertisement
Answering Machine Emulation
4. Dial the 3- or 4-digit destination number where calls are to
be forwarded (Station, Voice Mail, ACD/UCD groups, Hunt
group). A confirmation tone will sound.
5. Replace the handset or press the ON/OFF button.
To remove call forwarding:
1. Lift the handset or press the ON/OFF button.
2. Press the FWD button. A confirmation tone will sound and
the FWD LED will extinguish.
Answering Machine Emulation
When a call is sent to your voice mailbox, you can press a
preprogrammed flexible button to listen to the caller leaving
the voice mail message. If you decide to speak with the caller,
you can press the preprogrammed button to be connected to
the caller.
Notification Methods
There are two methods of notification, a Ring Mode or a
Speaker Mode. These methods are controlled by the type of
flexible button assigned on the telephone.
The preprogrammed button type defines the operation mode
(654+0=Ring Mode, 654+1=Spkr Mode). An incoming CO call
rings at a station and forwards (except busy type) to the
station's VM mailbox.
17
Advertisement
Table of Contents
