Table of Contents
Advertisement
Speed Dial
To store speed dial numbers:
1. Press the SPEED button once.
2. Press an OUTSIDE LINE button or the POOL button.
-or-
Select an outside line by pressing the SPEED button again.
3. Dial the speed bin location.
4. Dial the desired telephone number and include these
special codes:
TRANS -- Initiates a Pulse-To-Tone switchover.
HOLD -- Inserts a Pause.
FLASH -- Inserts a Flash into the speed number.
TRANS -- When used as the first entry in the speed bin, this
inserts a non-display character causing numbers stored in
the bin not to appear on the digital telephone's display
when bin is accessed.
5. Press the SPEED button.
6. Replace the handset to end the speed bin programming.
To program multiple speed numbers:
1. Press the SPEED button twice to conclude programming a
number.
2. Enter the next speed number bin to program.
If the station has no line appearance for the line
programmed into the speed bin, that line comes up under
the LOOP button or POOL button when accessed.
To erase an existing speed bin:
1. Press the SPEED button twice.
2. Dial the speed bin location.
3. Press the SPEED button again. A confirmation tone will
sound.
97
Advertisement
Table of Contents
