Receiving Faxes - Kyocera FS-1025MFP Operation Manual

Receiving Faxes

FAX Automatic Reception
To have the machine receive faxes automatically, no special operation is required.
Flow of Reception
Memory Reception
When the machine cannot print a fax due to paper running out or a paper jams, it temporarily stores originals that have
been sent in the image memory. When the machine returns to the printable state, printing starts.
To print the received originals, supply paper or remove jammed paper.
1
Reception Starts.
When a fax has been sent to you, the machine starts receiving the fax.
After reception has started, the Processing indicator blinks.
Note You can change the number of times the ringing tone rings. (Refer to Fax Settings
on page 7-24.)
2
Reception Print.
Received faxes are output to the inner tray with the printed side facing down. The inner tray can
hold a maximum of 100 sheets of plain paper (80 g/m²). However, the number of sheets varies
with the condition of the paper to be used.
IMPORTANT When the number of sheets to be printed exceeds the number of sheets that
can be held, remove all the paper on the inner tray.
Even if the machine is not capable of printing due to paper running out or a paper jam, it
can still receive faxes (memory reception).
7-21
FAX Operations