Kyocera FS-1025MFP Operation Manual page 99

Printing from Print Box
Print a print job saved in a Print Box.
Note The Default box can only be used from a machine connected by USB.
All print jobs saved in the selected Print Box are printed.
KYOCERA Client Tool must be running on the computer from which printing from Print Box is executed. Refer to
Machine Settings on page 2-26.
After being printed, the print jobs in the Print Box are deleted.
1
Press [Print Box].
2
Press [Program 1] to [Program 3] to select the Print Box.
If a Print Box is not selected, the jobs stored in Default box are printed.
The following boxes are pre-registered in the Print Box Program.
Program 1: Box 1
Program 2: Box 2
Program 3: Box 3
Note When Program 1, 2 or 3 is selected, the Name set in the Preset Tool is
displayed. Also, the folders for Boxes 1 - 3 can be changed in the Preset Tool. Refer
to Program Settings on page 2-32 for registering programs.
3
Press [Start] to start printing.
4-7
Ready to print.
Folder 1
Printing