Kyocera FS-1025MFP Operation Manual page 117

ECM TX
Set whether ECM TX is performed. ECM is a communication mode specified by the ITU-T (International
Telecommunication Union) that retransmits data when an error occurs. Fax machines that have ECM mode check for
errors as they communicate, preventing distortion of the image due to noise on the line and other conditions.
Note When there is a large amount of noise on the line, communication may take slightly longer than when Off is
selected.
4
Press [▲] or [▼] to select FAX.
5
Press [OK].
6
Press [▲] or [▼] to select Transmission.
7
Press [OK].
8
Press [▲] or [▼] to select FAX Dialing Mode.
9
Press [OK].
10
Press [▲] or [▼] to select Tone(DTMF) or Pulse(10pps).
FAX Dialing Mode
Tone(DTMF)
11
Press [OK].
1
Press [Menu].
2
Press [▲] or [▼] to select System Menu.
3
Press [OK].
4
Press [▲] or [▼] to select FAX.
5
Press [OK].
6
Press [▲] or [▼] to select Transmission.
7
Press [OK].
8
Press [▲] or [▼] to select ECM TX.
9
Press [OK].
10
Press [▲] or [▼] to select On or Off.
ECM TX
Off
11
Press [OK].
b
b
7-5
FAX Operations