Clearing Paper Jams - Kyocera FS-1025MFP Operation Manual

Clearing Paper Jams

If paper jams in the paper transport system, or no paper sheets are fed at all, the machine automatically goes offline, and
the Attention indicator will flash. KYOCERA Client Tool can indicate the location of the paper jam (the component where
the paper jam has occurred). Remove the paper jam. After removing the paper jam, the machine will resume printing.
Possible Paper Jam Locations
Detailed paper jam positions are as follows. Refer to the indicated page number to remove the paper jam.
A
B
Paper Jam
Error Message
Locations
A
PaperJam.
(RearCover)
B
Cannot feed paper.*
C
D
Paper Jam. (DP)
* Cannot feed paper. also appears when the paper has run out. In this case, add paper. Refer to Loading
Paper on page 2-5.
General Considerations for Clearing Jams
Bear in mind the following considerations when attempting paper jam removal:
CAUTION When removing a paper jam, pull the paper gently so as not to tear it. Torn pieces of paper are
difficult to remove and may be easily overlooked, deterring the paper jam recovery.
• If paper jams occur frequently, try using a different type of paper, replace the paper with paper from another ream, or
flip the paper stack over. The machine may have problems if paper jams recur after the paper is replaced.
• Whether or not the jammed pages are reproduced normally after printing is resumed, depends on the location of the
paper jam.
C
Message displayed in
KYOCERA Client Tool
and Status Monitor
Paper jam
Add paper
Paper jam
D
Description
A paper jam has occurred in the rear
cover.
A paper jam has occurred in the
cassette.
A paper jam has occurred in the
Manual Feed tray.
A paper jam has occurred in the
document processor.
9-14
Troubleshooting
Reference
page
9-15, 9-16
9-17, 9-18
9-19
9-20