Adjusting The Fan Speed; Fan Only - Sanyo SAP-KRV94EHDX Technical & Service Manual

3. Adjusting the Fan Speed

A. Automatic fan speed
B. Manual fan speed

4. Fan Only

14
Operation with the Remote Control Unit (continued)
• Choose the best position in the room for the remote control unit, which
NOTE
also acts as the sensor for room comfort and transmits the operating
instructions. Once you've found this best position, always keep the remote
control unit there.
• This appliance has a built-in 5-minute time delay circuit to ensure reliable
operation. When the operation button is pressed, the compressor will start
running within three minutes. In the event of power failure, the unit will
stop.
Simply set the FAN SPEED selector button to the
This automatically sets the best fan speed for the room temperature.
If you want to adjust fan speed manually during operation, just set the FAN
SPEED selector button as desired. [
STEP 3
If you want to circulate air without any temperature control, follow these steps:
STEP 1
STEP 2
STEP 3
,
STEP 2
STEP 1
Press the MODE selector button to switch to the fan mode
.
Press the ON/OFF operation button.
Press the FAN SPEED selector button to select the fan
speed of your choice (
position.
, or ]
, or ).
OI-791-14-EG