Operation With The Remote Control Unit; Automatic Operation - Sanyo SAP-KRV94EHDX Technical & Service Manual

1. Automatic Operation

12
Operation with the Remote Control
Unit
This unit automatically switches between cooling operation and heating
operation according to the difference between the room temperature and the
temperature setting.
NOTE Check that the circuit breaker on the power panel is turned on.
Once mode is selected and the unit is preset by following the steps below,
you can have the air conditioner automatically bring the room to the desired
temperature simply by pressing the ON/OFF operation button.
STEP 1
STEP 2
To stop the air conditioner, press the ON/OFF operation button again.
• To change the temperature setting; press the temperature setting buttons
NOTE
and change the setting to the desired temperature.
STEP 2
STEP 1
Press the MODE selector button to
Press the ON/OFF operation button.
.
OI-791-12-EG