Removing And Mounting The Fan Motor - Sanyo SAP-KRV94EHDX Technical & Service Manual

8-7. Removing and Mounting the Fan Motor

8-7-1. Removing the Fan Motor
Remove the electrical component box cover
according to the previous section.
(1) Loosen the fan mounting screw with a hex
wrench of 2.5mm opposite side distance.
(2) Remove three screws which secure the fan
motor.
(3) While removing the fan motor mounting bracket,
pull out the fan motor shaft as well.
(4) Remove the tab of the fan motor bracket and
separate into two parts.
8-7-2. Mounting the Fan Motor
To mount the fan motor, reverse the steps for
removal.
Fan mounting
screw
Tab
Hook
Fan
Hex wrench
Fan mounting screw
( )
tightening torque:
2.45+/-0.49N-m
(25.0+/-5kgf-m)
36
Fan
Fan mounting
screw
Hex wrench Loosen the screw as you use
(
a flashlight.
Fan motor bracket
Fan motor lead wire
(
Connect it with the wire
3~4mm
trailing down.
Fan motor
mounting
bracket
)
Another hook
also exists to
this side.
Fan motor
mounting bracket
Fan motor
)