Adjusting The Fan Speed - Sanyo KMS0912 Instruction Manual

Night Setback Mode
in Cooling
What does the Night
Setback mode mean?
2. Adjusting the
Fan Speed
A. Automatic
10
Operation with the Remote Control Unit (continued)
CD CO
FAN corn-
NORM. PROGRAM
ON CSC-D
TIMER
LOW HIGH
MED. AUTO
FAN SPEED
STEP 1: Press the NIGHT SETBACK button in cooling.
The mark appears at the lower left of the display.
Press the NIGHT SETBACK button again to release the night setback
function. This button has no effect in the FAN mode.
Setting
Temperature
30 minutes 30 minutes
In this mode. the air conditioner will cool the room to the set
temperature, and then the thermostat will make the unit pause. After
about 30 minutes, the air conditioner will automatically raise the set
temperature by 2 0 F. When the room temperature reaches the newly set
value, the thermostat will cause the unit to pause. After about 30 minutes
the temperature will again be raised by 2 0 F. This enables you to save
energy without sacrificing comfort.
This function is convenient when gentle cooling is needed.
STEP 1:
Simply set the FAN SPEED selector to the "AUTO" position.
A microcomputer in the air conditioner automatically controls the fan
speed when the AUTO mode is selected. When the air conditioner starts
operating, the difference between the room temperature and the set
temperature is detected by the microcomputer which then automatically
switches the fan speed to the most suitable level.
TIMEP
CI_OCK
STEP 1
Room
Temperature
20F
Time
Olß52ao