Adjusting The Fan Speed - Sanyo SAP-K71GJA-S Technical & Service Manual

2. Adjusting the
Fan Speed
A. Automatic
Cooling and DRY mode:
B. Manual
OI-378-13EG
Operation with the Remote Control Unit (continued)
• This appliance has a built-in 3-minute time delay circuit to ensure reliable
NOTE
operation. When the operation button is pressed, the compressor will start
running within three minutes. In the event of power failure, the unit will
stop. When the power is restored, the unit will restart automatically after
three minutes.
Simply set the FAN SPEED selector button to the
A microcomputer in the air conditioner automatically controls the fan speed
when the
the difference between the room temperature and the set temperature is
detected by the microcomputer which then automatically switches the fan
speed to the most suitable level.
When difference between
room temperature and set
temperature is
2°C and over
Between 2°C and 1°C
Below 1°C
If you want to adjust fan speed manually during operation, just set the FAN
SPEED selector button as desired. [
mode is selected. When the air conditioner starts operating,
FAN SPEED
High
Medium
Low
position.
, , or ]
13