Fixed Installation - Televes RSD - 7296 User Manual

User Manual
4.2.- Fix Setup
There are the following options:
- One antenna.
- Two antennas
- More than two antennas. If you select this option, you will go directly
By pressing the
and confirm it using the OK button on the remote control.
- One antenna.
Select the type of types of converters that you have in your installation
by pressing the
OK button.
The options that are available are:
- One universal LNB
- Two universal LNBs
- Monoblock LNB
- Twin LNB
- Quad LNB
Using the or
desired satellite, and then using the
"Carriers" window where you will be able to select various opera-
tors (transponders) of the selected satellite using the
buttons.
Using a compass, direct the antenna towards the desired satellite
until you receive the best possible signal level.
If you do not receive a level higher than 60%, follow these steps:
- Go to the "Carriers" window and using the
modify the operator checking to see if the level has increased.
- Confirm the inclination angle and the position of the antenna.
- Check the position of the LNB.
to section 9.- System Setup menu.
or buttons, you can select one of the options
or buttons, and confirm your selection using the
buttons, in the "Satellite" window, select the
or buttons, access the
or
or buttons
44
"RSD - 7296"