LIND DC Power Adapters Operating Instructions Manual page 66

Usage Instructions
When connected to the auto cigarette lighter or AC wall outlet, the Lind Auto/Air AC adapter
will power your device or charge your device battery automatically regardless of whether the
device is turned on or off.
When connected to the in-seat power system in an airplane, the adapter will power your device
provided that the power draw of your device does not exceed the power limits of the airline
power system. The airline in-seat power system is limited to 75 Watts maximum.
Using the Auto/Air AC adapter with a wall outlet.
Using the AC power cord, plug the cord into the AC wall outlet where a 100-120 volt or 200-
240 volt 50/60 Hz AC power source is available.
1. Plug the AC power cord into the adapter and then into the AC wall outlet.
2. Plug the output cable into the adapter. Twist the plug for easier insertion.
3. Plug the end of DC output cable into your notebook computer.
4. When the LED light of the adapter turns on, your device is powered.
Using the Auto/Air AC adapter in a vehicle.
This Auto/Air AC adapter can be used in any vehicle with a 12-volt DC cigarette lighter socket.
CAUTION: To prevent power interruption and any negative effects on your mobile device,
please unplug the power adapter from the cigarette lighter socket prior to starting your engine.
After the engine has been started, you can plug the adapter to the cigarette lighter socket.
1. Plug the cigarette lighter input cable into the power adapter. Twist the plug for easier insertion.
2. Plug into the cigarette lighter accessory socket of the vehicle or remove the cigarette lighter
from its socket and plug the cigarette plug into the lighter socket.
3. Plug the output cable into the adapter. Twist the plug for easier insertion.
4. Plug the end of DC output cable into your notebook computer.
5. When the LED light of the adapter turns on, your device is powered.
WARNING: The cigarette lighter could be hot and burn your skin or flammable materials. Let
the lighter cool completely before unplugging it.
Using the Auto/Air AC adapter in an airplane.
When traveling with an airline that provides a compatible in-seat power system, the Auto/Air
AC adapter will power your device with the airline input cable. Some airlines provide a 12-
volt DC cigarette socket instead of a special air connection. On these airlines, use the vehicle
cigarette lighter connection.
1. Plug the airline input cable into the power adapter. Twist the plug for easier insertion.
2. Plug into the airline in-seat power accessory socket if it is available.
3. Plug the output cable into the adapter. Twist the plug for easier insertion.
4. Plug the end of DC output cable into your notebook computer.
5. When the LED light of the adapter turns on, your device is powered.