LIND DC Power Adapters Operating Instructions Manual page 84

DC Input Characteristics:
Input
EMI/RFI Characteristics:
Input Transient Protection:
Low Input Voltage Shutdown:
High Input Voltage Shutdown:
Load Dump Protection:
Reverse Polarity:
DC Output Characteristics:
Output Voltage
Short Circuit Protection:
Isolation Voltage:
Noise and Ripple:
Physical and Environmental Specifications:
Operating Temperature:
Storage Temperature:
Shock:
Acceleration:
Vibration:
Humidity:
Salt and Fog:
Sand and Dust:
Enclosure:
Finish:
Weight:
Dimensions:
Mounting Hole Size:
Following information is only for EU-member states:
The use of the symbol indicates that this product may not
be treated as household waste. By ensuring this product is
disposed of correctly, you will help prevent potential negative
consequences for the environment and human health, which
could otherwise be caused by inappropriate waste handling
of this product. For more detailed information about recycling
of this product, please contact your local city office, your
household waste disposal service or the shop where you
purchased the product.
Technical Information
11 to 32 VDC
Meets MIL-STD461E,
CE102, CS101, CS114, CS115,
CS116, RE102, RS101, RS103
Meets MIL-STD-1275D,
Voltage Surge +100 VDC,
Voltage Spike +/-250 VDC
Auto Recovery
Auto Recovery
Meets ISO 7637
Auto Recovery
12-24 VDC Factory Set (See unit label)
Auto Recovery
Input to Output Non-isolated,
100 VDC Output to Case
Meets MIL-STD-1275D
and MIL-STD461E CE102
-40 to +60º Centigrade
-40 to +80º Centigrade
Meets MIL-STD-810F, Method 516.5, Procedure I
Meets MIL-STD-810F, Method 513.5, Procedure I,
Helicopter
Meets MIL-STD-810F, Method 514.5, Procedure I,
Category 20 Ground Vehicles
Meets MIL-STD-810F, Method 507.4
Meets MIL-STD-810F, Method 509.4
Meets MIL-STD-810F, Method 510.4
Extruded Aluminum
Black Anodized
32 ounces (.7kg)
9.18 x 2.98 x 1.14 inches (23.3 x 7.6 x 2.9 cm)
.20 inch (5.1 mm)
3