Technical Specification - LIND DC Power Adapters Operating Instructions Manual

Charging begins automatically after inserting a battery pack into the charger bay.
• The Power On and Charge Status indicators operate the same as when the
battery pack is charged in the computer (when the power is off). The time it takes
for each battery to fully charge depends on multiple variables; the state
of charge when inserted; the age and condition of battery; the specific battery size.
Refer to the computer reference manual for additional information.
• When more than 1 batteries are inserted in the multi-bay battery charger, they will
be charged simultaneously. The order of charge completion will depend upon the
variables mentioned above.
• The battery pack, battery charger and the AC adapter will become somewhat
warm during normal use. This is normal and is not a malfunction.
POWER ON INDICATOR
Charging the battery pack
Charger Connections
(BATTERY AND CHARGER MAY LOOK DIFFERENT THAN THE ONES PICTURED)
DC POWER INPUT
BATTERY CHARGERS
CHARGE STATUS INDICATOR

Technical Specification

Input Voltage:
Max. Charge Current:
Operating Temperature:
Humidity:
Indicators
BATTERY (NOT INCLUDED WITH CHARGER)
15.1 - 16 VDC
*AC ADAPTER
*THE AC ADAPTER IS NOT INCLUDED WITH ALL CHARGERS.
WHEN NOT SUPPLIED, REFER TO THE CHART ON PAGE 2 TO
SELECT THE PROPER PANASONIC AC ADAPTER TO USE.
15.1 - 16.0 VDC
Approx. 2.5 amps per charge bay
5º C to 35º C {41º F to 95º F}
30% to 80% RH (no condensation)
LED on each charge bay (Input Power present)
LED on each charge bay (Charge Status)
3
AC CORD
T4 - T5 CHARGER