Table of Contents
Advertisement
B L U E
P O W E R
13. Place the middle cover
14. Attach the proper node.
18
15. Attach the connectors to the wires
and clamp them accordingly.
Caution!
Do not connect the wires to
the node. This will be done
during the configuration of
the system.
Installation & operation manual
30 cm
12"
16. Attach the wires with a clamp every
30 cm (12"). Allow some space for
additional nodes to install.
17. On the end of the bus cable:
Cut the bus cables to the proper
length and insulate them with
insulating tape.
Advertisement
Table of Contents
