Cla Reboot; Load Default Settings And Restart - OPTOKON EDFA User Manual

CLA Reboot

Reboot service provides restart of PC motherboard.
NOTICE: this procedure can take about 3 minutes.
WARNING: If you changed some parameters (e.g. IP address or Firewall etc),
your changes will be applied after restart.

Load default settings and restart

This procedure can be separate to two groups:
 Load default settings of the DEVICE and restart
EDFA unit settings will not be changed.
o
 Load default settings of the EDFA unit and restart
DEVICE settings will not be changed.
o
NOTICE: Each restart procedure can take about 3 minutes. Same as CLA
reboot.
WARNING: Resetting to default setting probably set EDFA unit to OFF mode!
Picture 25 - Restore - CLA reboot
Picture 26 - Restore - System and EDFA defaults
EDFA optical amplifier – user manual
40