Starting Operation - OPTOKON EDFA User Manual

EDFA optical amplifier – user manual

7 Starting operation

Switching on procedure - step by step
Please check the completeness of the product during unpacking
Mount the unit holder – rack mount installation kit on both sides of the amplifier
box
Install the CLA box into the rack
Connect the power supply cable into any power supply socket on the rear panel
Connect the UPS cable into second power supply socket
When you need to change the setting of the optical amplifier – connect to the
CLA according to the description in Chapter 7.
Switch both switches on the power supply sockets ON.
After switching ON – the CLA will start the operation
Initialization of the CLA module starts independently of the PC function.
After finishing all initialization processes, the CLA settings can be changed
according to the description in Chapter 8, 9, 10.
16