NOTE:
The EDFA units contain internal memory, they can work independently of
PC function
Green LEDs 5V and 12V indicate internal power supply voltage
Yellow LED indicates EDFA LOSS alarm. The limits shall be set - by
commands LI, LO, see chapter 8, 9, 10)
Key switch position:
Enable or disable EDFA function. Enable – Pump diode ON, Disable – Pump
diode OFF. This setting has effect to ADI alarm (chapter 13)
6.2 Display (only version with display -D-)
Legend
Description
Display
If LED blinks, the Display module is function
EDFA 1
Present active EDFA unit
EDFA 2
Present active EDFA unit
?
Quick help
One step back
Don`t light – the EDFA unit without alarms, don´t active the pump
diode
Green light – the EDFA unit without alarms, active the pump diode
Red light – the EDFA unit report some alarms
(e.g. ADI, LI or LO alarm, see in chapter 13)
Don`t light – the EDFA unit without alarms, don´t active the pump
diode
Green light – the EDFA unit without alarms, active the pump diode
Red light – the EDFA unit report some alarms
(e.g. ADI, LI or LO alarm, see in chapter 13)
EDFA optical amplifier – user manual
14