Firewall - OPTOKON EDFA User Manual

Firewall

Firewall status
Access from gateway
Ping reply
For accept change in IP list click to button "Set"
NOTICE: For accept changes in firewall system click to button "Firewall restart"
WARNING: Check your new changes in Firewall application. If you set a wrong
values, device can`t accessible after Firewall restart.
Picture 14 – Firewall
Enable or Disable Firewall function
Allow or Denied access from gateway to the device
Allow or Denied ping to the device

Allow only to listed below

Allow for all

Denied
To this part type all IP address, which can connect to the
IP list
device by Enable firewall
Table 10 – Firewall
EDFA optical amplifier – user manual
33